This Website for Selling Wintrol
Windows and Skylight Motorizing
Systems and Components
Is Out Of Business

These domain names:
wintrol.com, wintrol.us, win-trol.com, win-trol.us
fasirand.com, fasirand.us
are for sale. Contact mike@wintrol.com

RS Module

RS Module This package contains:
A master switch that can be mounted in a standard electrical box.
A white face plate.

The RS Module requires an LC-II Control Switch to control the window and/or skylight motors. If you don't already have an LC-II Control Switch it must be ordered as a separate item (LC-II Control Switch) or as a kit (LC-II Control Switch Kit).

The RS Module provides a master (common) wired remote switch for use with an LC-II Control Switch. It can be used with a single LC-II Control Switch or it can be used to centralize the control of multiple LC-II Control Switches in applications where you want to control more than three windows with a single push button. Like the IR Receiver it can be used with up to 25 LC-II Control Switches to operate up to 75 windows and/or skylights. It also has a Rain Sensor input.

To see how an RS Module integrates with all of our other components to form a complete system for motorizing your casement, awning, and skylight windows, take a look our wiring diagram. It should give you a basic guideline for planning and creating your own motorized window and skylight system.

Price: $157.95 USD
Part No. RSMOD01	-	RS Module.

RS Module Installation Instructions

You can download the RS Module Installation Instructions (445KB) to familiarize yourself with the RS Module installation. The installation instructions are in Adobe PDF format and require Adobe's free Acrobat Reader. If you don't have Acrobat Reader you can download it from Adobe's website.

Up to 25 LC-II Control Switches can be controlled from a single RS Module. However, the LC-II Control Switches are not controlled individually. In addition, more than one RS Module may be used to control one or more LC-II Control Switches. Note: An LC-II Control Switch can still be used for localized control even when it is controlled by an RS Module.

Step 1 - Gather your Tools

#2 Philips head screwdriver
1/10" (2.5 mm) bladed screwdriver
Class II, low voltage wire for the switches
An assortment of wire nuts

Step 2 - Run Electrical Wires

Use Class II wire for all connections. Run low voltage wires at least 12" away from high voltage wires to avoid any electrical interference.
Run two (2) power wires from either a transformer or an LC-II Control Switch to the RS Module. Stranded wire is recommended for all power connections.
Run three (3) control wires (Open, Close, and Ground) between the RS Module and the LC-II Control Switch.

Step 3 - Connect Wires

Connect the RS Module per the wiring diagram and the RS Module Connectors table below.
Mount the RS Module in a single gang electrical box.

RS Module Connectors

Symbol	Connection	Description
P	Power	Input from 24 VAC transformer. This can be from any one of the transformers in the system.
O	Open	The unit(s) will open when this output connection is driven low (0 VDC).
C	Close	The unit(s) will close when this output connection is driven low (0 VDC).
F	N/A	This connection is not used.
G	Ground	Signal ground.
R	Rain Sensor	Rain Sensor inputs (2). Moisture on the Rain Sensor will cause the unit(s) to close.

RS Module Operation

To Open: Press the "Open" button once.
To Close: Press the "Close" button once.
To Stop: Press the button which is opposite of the window/skylight travel.
The "Reset" button (not marked on the RS Module) does not function.

Note: A power-on reset of the system can only be done from the LC-II Control Switch.

|--------------------|